|
|
>stockists |
|
|
 |
|
Bedrock is the first step in preparing your walls and is for use over previously
painted surfaces as an undercoat for any of the Jamie Durie Signature paints.
Bedrock can also be used to cover bare surfaces as an undercoat sealer. |
|
 |
|
| Over previously painted surfaces, scrape off loose and flaking paint. Fill nail holes
and cracks with suitable filler, sand and dust off. Spot prime all joints and repaired
areas and apply one coat of Bedrock. Over new plaster, render or brick, spot prime
all joints and repaired areas and apply two coats of Bedrock. Allow to dry a
minimum of 6 hours in between coats. |
|
|
|
|
 |
 |
|
Stir paint thoroughly. Apply by brush,roller or spray. Touch dry in 30 minutes.
Recoat in two hours. Do not apply in high humidity or where air or surface
temperatures are below 10C or above 30C. |
|
|
|
|
|
Interior |
Exterior |
Brush |
Roller |
Spray |
Yes |
Yes |
Yes |
Yes |
Yes |
|
|
|
|
|
| |
| Touch Dry |
2 hours |
| Recoat |
6 hours |
Coverage
(Square Meters per Litre) |
10-15 |
| Water Washup |
Yes |
| Guarantee (years) |
N/A |
VOC Rating
(grams per Litre) |
14 |
|
|
|
|
|
|
Safety Warning: Keep out of reach of children. Avoid swallowing. Avoid contact with eyes.
If accidental eye contact occurs, rinse immediately with water. Provide adequate ventilation during use. |
|
